home 
wiki
wiki
RGInnerEast
Goals
To co-ordinate and support nodes in the inner eastern and middle eastern suburbs of Melbourne.
Members
| Name | Node | Location |
| Lunn | NodeDFC | (Box Hill) |
| Tan | NodeAHI | (Hawthorn) |
| Fregon | NodeFMO | (Box Hill South) |
| Fulton | NodeDDG | (Blackburn) |
| Andrew | NodeADD | (Hawthorn) |
| Owen Kaluza | NodeGCT | (Surrey Hills) |
| Josh | NodeGTU | (Camberwell) |
| Dan | NodeGMR | (Interloper from RGSouthern - Murrumbeena) |
Mailing List
No " working " mailing list yet.
What is happening with the
mailing list? -- It doesn't work very well...Locfinder Page
region 8
Map
Your node is not appearing on this map? You will need to edit your node details in LocFinder and set your OSPF region to 8 (Eastern).
big maphuge map that shows contoursUpdate
08 April 2004Guys, I've now got a fully operational AP with LOS to nowhere (well, just the local guide hall/Garie St. and park). Has anyone thought of setting up tunnels through the internet? I've got a 10G cable plan but only use 2 or 3 G a month so I could afford to run a few low speed ipsec tunnels to other nodes.
Darren
03 December 2003
Hi,
I'm Dan - I run NodeGMR in Murrumbeena. I have a 12 metre mast with an Omni and an AP powered by a 1 watt amp. I have done netstumbling in Glen Iris, Ashburton and Ashwood along High St and can pick up my own signal in these places. I can also pick myself up on the hill near the corner of Ferntree Gully & Huntingdale Rds and from the intersection of Dandenong Rd & Atkinson St, Oakleigh East.
I'm connected to the RGSouthern cluster which is in turn connected to NodeGHO (Mt Dandenong) and NodeGDW (Taylors Lakes) So if you connect to me you will be connected to the whole network - when GHO is running that is.
email me at evolute74_at_hotmail_dot_com if you're interested.
02 December 2003
I've moved to Garie St. Blackburn which has LOS to nothing except the neighbours, the local guide hall and the pine trees lining Box Hill cemetry :-(
Will have the AP fired up permanently this week.
Now if we can find someone to host a node on the other side of Middleborough Rd, say Sweetland Rd or Barcelona St which have LOS to the Dandanongs we'd be in business.
Darren (DDG)
17 October
Hi all, added myself as i'm getting close to ready - I'm in Surrey Hills near corner of Mont Albert & Chatham rds. May have LOS to Darren, but setup is still a work-in-progress.
Will update once equipment finished and i've had a better look from the roof.
Owen (Node GCT - Ozone)
29 July
Hi all,
I'm just trying to update my node status. I have just moved, but am still in Hawthorn. Basically no_fuss and myself have laptops and enterasys cards in Hawthorn, I am on Tooronga Rd near John Gardiner, and he is closer to Swinburne and Burwood Rd. We do not have clear line of sight to each other, but we are really not far off becoming operational, and so it would be good to see if there are any new possibilities for hookup.
Damon Smith (ramjet) node ABA
17 July
by Darren
Hi Jeremy, I just added myself. I don't think I have LOS to anyone in this group, but I'm pretty much halfway between Box Hill and Hawthorn with (I think) LOS to Surrey Hills. I'm tooled up (AP, antennas, dedicated linux router etc) but so far haven't found the time or ladder to climb on the roof for a look.
10 July
By Jeremy
Great.... we now have enough people to form a regional/working group. I'll see what I can do about getting a mailing list arranged.
09 July
by Dave
Hi, after emailing Jeremy, I added myself. I'm on the other side of the crest south with a clear view south and southwest for a good distance, blocked by Wattle Park East-ways, and North again is that crest.
02 July
by Laurence
Jeremy, I just added myself. Although I am essentially in a hollow in Hawthorn surrounded by trees, we might be able to get something to work - distance is not great though. Importantly, I have an old pentium with 2 interfaces
.I have assumed WGTemplate is not the right mail address?
Box Hill area
I am Looking for people who may have line of site to me in Box Hill.Routing
In the early stages assuming the problem hasn't been solved by the time anything is setup, I would like to experiment with OSPF and possibly other dynamic routing protocols. So if nodes in this area would like to participate then please let me know. All that would be required is say an old pentium with 2 or more interfaces running any operating system with a suitable routing daemon. I can setup all the software (using Linux in that case) if you like.Back to RegionalGroups
Version 7 (old) modified Mon, 26 Jul 2021 12:49:29 +0000 by Ozone
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]