home 
wiki
wiki
NodeILE
| | Owner: Location: Kallista Status:Testing New Links being Established |
Node Log
12/12/04 - (Old Site With many thanks to Peter from NodeGUR and Mike from NodeHKF who installed 2 Hills 24dB grid antenna and 2 Linksys WRT54GS creating individual links to NodeGUR and NodeFOB
25/6/05 - The Fernycreek site is all down now & we're in progress of setting up the new site at Kallista. Expect to have some equipment running again on 2/7/05.
Here's a scan from this visit with a 25db & Veritech Card.
25/6/05 - The Fernycreek site is all down now & we're in progress of setting up the new site at Kallista. Expect to have some equipment running again on 2/7/05.
Here's a scan from this visit with a 25db & Veritech Card.
| BSSID | SSID | CHANNEL | WEP | SIGNAL | NOISE |
| 00:02:6F:34:0A:56 | nodeAFH.wireless.org.au | 3 | N | -86 | -93 |
| 00:09:5B:97:40:32 | xac33 | 11 | Y | -88 | -95 |
| 00:12:17:33:34:99 | gur.melbournewireless.org.au | 8 | N | -75 | -93 |
| 00:30:BD:F2:3E:43 | belkin54g | 11 | N | -89 | -96 |
| 00:06:25:57:FA:13 | linksys | 6 | Y | -88 | -95 |
| 00:0F:66:C5:2F:A8 | majestic-wifi-02 | 13 | N | -84 | -95 |
| 00:11:95:3C:EC:B9 | chris | 10 | Y | -92 | -96 |
| 00:06:25:54:26:F2 | XBOX | 11 | N | -91 | -95 |
| 00:09:5B:94:61:86 | FOB_OMNI | 11 | N | -90 | -95 |
| 00:30:7D:00:05:82 | a3194.0.78a | 11 | Y | -75 | -95 |
| 00:30:7D:00:05:4E | a3195.0.70a | 11 | Y | -72 | -95 |
| 00:13:60:4F:D5:B0 | 5 | N | -89 | -94 | |
| 00:0F:B5:5F:A7:18 | NETGEAR | 11 | N | -89 | -95 |
| 00:09:5B:EA:00:88 | maverick | 11 | N | -91 | -95 |
| 00:30:7D:00:04:ED | imx.ap1 | 1 | Y | -86 | -92 |
| 00:0F:3D:AB:B4:28 | barfellwireless | 6 | N | -89 | -95 |
Equipment
Services
Planned- OSPF
- Webcam
- Backbone uplink point
Plans
New Kallista site :- Stabilise the link back to GUR & possibly FOB (LOS Permitting at FOB).
- Setup a waveguide with a 200mw senao AP to enable LOS tests to this site.
Notes : The view covers from about Mt Waverley to somewhere around hampton park or south dandenong not sure yet of the bearings.
Checkout
Here for LOS checks.Problems
Power to the pole is limited by POE.Learnings
- The DLINK 48v DWL-P200 poe kit transmitter works with the senao 2611 cb3 delux internal POE.
- POE seems to be configured with Positive (+) on Cat5 pins 4/5 (green/greenwhite) and Negative (-) on pins 7&8 (Brown/Brownwhite)
- Most AP's seem to have dioes to protect against power polarity reversal.
- The Linksys WET11 V1 seems to be only missing two surface mount diodes to enable it use POE. (Haven't tested)
Version 5 (current) modified Mon, 26 Jul 2021 12:49:29 +0000 by melb_ap
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]