--- Version
+++ Version 1
@@ -0,0 +1,45 @@
+### Index ###
+
+
+!!! Vitals
+* '''Manufacturer :''' Rebadged for IBM
+* '''Model :''' xxxx
+* '''Type :''' Access Point / Router / Client Card
+* '''External Antenna Jack :''' RP-SMA (RP-SMA RP-TNC )
+This card was shipped to us by mistake and I found it floating in a draw.
+The Ant portion is double height - makes it useless to use in the bottom slot.
+Unit snaps apart from the sides, then the "ant. cover" comes off with plastic clips around the outside.
+
+has two leds - showing "diversity". Most webpages I have found on this card says that one ant is only for recieve (not sure which one).
+
+The external ant is inaccesible for normal use (to use it you will need to remove the cover to get to it - and drill a hole in the cover to keep it connected. According to websites I have found it is an "MT" connector (but haven't found a stockist yet).
+You can bypass the external ant with some solder pads that are on the board - or unsolder the connector.
+
+Had a lot of problems with this unit in my Thinkpad T41, with an internal mini-pci card - aparently the drivers are sufficuently similar that they affect each other. Make sure you disable the mini-pci card if you are going to try and use this as an additional (or in my case - external ant).
+
+Drivers accessible via IBM website.
+
+
+
+!! Official Details
+
+
+
+!! Pictures
+
+
+!! OEM Firmware
+
+!! Alternate Firmware
+
+
+!! Support Forum
+
+
+!! Misc Notes & Links
+
+
+!! Modifications / Addon's
+
+
+!! Discussion
[