RGWesternPlains
Western Plains Regional Group
Description
- Barron land, large factories, new estates is what its all about in the Great Western Plains (and no ADSL! for those out bush )
News
- 26/09/04 - HUY <-> HTP survey LOS
- 16/08/04 - ECF <-> HTP survey LOS
- 29/08/04 - No signal was available between ECF & HTP, trying other methods and adding some height to clear the trees
- 26/09/04 - Tested HUY <-> HTP using downpipes.
Master craftsman Adrian NodeHUY has made a cheap microwave stable enclosure dubbed the cocoon by Rob NodeHTP see below ..
Do-It-Yourself Rob NodeHTP opted to go the way of the pool stick mast, complete with taped on downpipe see below ..
Materials required:
* roll of gladwrap
* roll of tape
- Premade solutions are considered in the works.
Wireless tests were carried out between the cocooned WRT54G and a senao both connected to downpipes.
Unfortunately due to an antenna and height problems at HTP no link was able to be setup, BUT after a trip to "the mound" and picking up NodeHTP and NodeECF using a yaggi things are looking promising.
Members
Mailing List
- Someone needs to set up a mailing list for this region and put details about how to subscribe in this space.
LocFinder Page
Area 2
Map
Your node is not appearing on this map? You will need to edit your node details in LocFinder and set your OSPF region to 2 (Western Plains).
big map that shows roads
huge map that shows roads and contours.
Current Projects
- ECF <-> HTP Project
- HTP <-> HUY Project
ECF
- Ordered a few bits and peices, namely a downpipe antenna for the connection to HTP
- In the process of testing the WRT54G against the veritech/seano
- Node ECF is operational! Coverage is currently mainly over Altona Meadows
HTP
- My homebrew downpipe turned out to be a leech antenna, with good receive signals but couldn't send very far at all! So, ordered one from FreeNet Antennas. NodeHTP now consists of: 8-Slot Downpipe, WRT54G, 7.2m Mast & a box to put everything in. It's all here, it just has to be put together. Soon!
- Gradually getting around to building the waveguide, and getting the AP in order. Should be happening soon
- N-Connectors & Pigtail for AP have been ordered - just got to get a mast, and the downpipe material, then it'll be complete!
- Mast & Waveguide ARE BEING BUILT!
GZQ
- After getting the home wireless network working I am now in the process of collecting mast, another wireless card, low loss cabling, etc to join the wider community
Back to RegionalGroups
Version 14 (old) modified Mon, 26 Jul 2021 12:49:29 +0000 by
Renjar [EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]