home 
wiki
wiki
NodeKIL
| | Owner: <lbellamy> Location: James Street, Belmont Status: Linked to KHI SSID: <SSID> Connecting... Set your SSID to kil.melbournewireless.org.au and contact lbellamy for more information. |
Node Log
29/05/10 - Installed Node (Ubiquity Nanobridge M5) and secured link to KHI.
Current signal strength at -87db, with an AirMax signal quality of 38%.
Confirmed current maximum throughput of the link of ~500kilobytes per second.
Will put another mast on the apex of the roof, which should raise the current height of ~5 metres to approx 8 metres. Once this is done, ill put an omni on top and allow others to connect.
Current signal strength at -87db, with an AirMax signal quality of 38%.
Confirmed current maximum throughput of the link of ~500kilobytes per second.
Will put another mast on the apex of the roof, which should raise the current height of ~5 metres to approx 8 metres. Once this is done, ill put an omni on top and allow others to connect.
Equipment
Current: Ubiquity NanoBridge M5 (Linked to KHI)
Current: MicroTik Routerboard 750G
Planned: Ubiquity NanoBridge M2 (to link to JEE)
Planned: Ubiquity Bullet M + Omni (allow link to me)
All Ubiquity devices run Ubiquity AirOS.
Services
Elaborate on services seen on the maps page (replace XXX with your node id). The node must be in testing or operational to be listed
Plans
Planned: Ubiquity NanoBridge M2 (to link to JEE)
Planned: Ubiquity Bullet M + Omni (allow link to me)
Problems
Current Antenna height and position gives degraded link to KHI.
Expecting to get at least a link strength in the mid to high 70's (-dB) but currently achieving high 80's.
CategoryNode
Version 1 (old) modified Mon, 26 Jul 2021 12:49:29 +0000 by lbellamy
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]