home 
wiki
wiki
CardProfiles
As requested in the Bugs page, card profiles are needed. This wikipage is for gathering some raw data for use in such a system.
Pwr(dBm) is to be recorded at which rate setting?
Veritech VAC2511-D 100 mW is -80 dBm @ 11Mbps
or
Veritech VAC2511-D 100 mW is -88 dBm @ 1Mbps
As per the Node page, Power/Sens is at 11Mbps 
I would recommend listing the Rx Sensitivity at 1Mbps, since that is the lowest common denominator. You can get a useable link at 1Mbps more often than you can get one at 11Mbps. -- DanFlett
| Manufacturer | Model | Pwr(dBm) | RxSens(dBm) | built-in gain(dBi) | MAC |
| Alloy | GL2422VP | 13 | -90 | 00:03:2F | |
| Avaya | AP3 | 15 | -84 | 00:02:2D | |
| Belkin | F5D6231-4 | 20 | -76 | 1 | |
| Cisco | 350 | 20 | -94 | 00:40:96 | |
| Compaq | WL110 | 15 | -80 | 2 | |
| Compaq | WL200 | 20 | -84 | 2 | 00:50:8B |
| Enterasys | Roamabout | 15 | -84 | 2 | 00:E0:63 |
| Dlink | DWL900AP+ | 15 | -90 | 2 | 00:40:05 |
| Dlink | 2000AP+ | 15 | -82 | 1 | 00:0F:3D |
| Dlink | DWL 520+ | 15 | -83 | 3 | 00:80:C8 |
| Fullbond | XI-1250A | 20 | -82 | 00:60:B3 | |
| Linksys | WRT54G | 15 | -82 | 2 | 00:0F:66 |
| Linksys | WAP11 | 18 | -84 | 1 | |
| Linksys | WET11 | 15 | -84 | ||
| Minitar | MN54GPC | 15 | -86 | 00:0C:76 | |
| Minitar | MNW2BPCI | 15 | -80 | 00:08:A1 | |
| Minitar | MNWAPB | 18 | ?? | 1 | 00:50:FC |
| Netgear | 5WG311 | 15 | -84 | 2 | 00:09:5B |
| Netgear | MA311 | 20 | -90 | 00:09:5B | |
| Orinoco | Silver | 15 | -84 | 2 | 00:02:2D |
| Senao | 23 | -85 | 2 | ||
| Senao | NL-2511 | 20 | -87 | ||
| Skymaster | XI-626 | 15 | -83 | 02:60:1D | |
| SparkLAN | ?? | 15 | -82 | 1 | 00:90:4B |
| SVEC | 1811-A | 15 | -88 | 2 | 00:40:F4 |
| Veritech | VAC2511-D | 23 | -89 | 00:02:6F | |
| Veritech | VAC2511-D | 20 | -80 | 00:02:6F |
Version 9 (old) modified Mon, 26 Jul 2021 12:49:28 +0000 by gummAY
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]