Diff: PebbleLinux

--- Version 1 

+++ Version 2 

@@ -49,7 +49,7 @@ 

 

 !! Installation 

 Installation is different to the usual method. 

-You will need an existing Linux installation to perform the install, either you're machine or someone elses (clues follow, if that hint isn't obvious enough). 

+You will need an existing Linux installation to perform the install, either your machine or someone elses (clues follow, if that hint isn't obvious enough). 

 Pebble comes packaged as a ''near'' working image. (ie:- a base system that's compressed into a (http://catb.org/~esr/jargon/html/T/tarball.html tarball)) which then needs to be unpacked onto the target drive. Some minimal configuration then remains to make the new drive bootable, after that YMMV depending on the (/wiki/?OldHardwareDatabase#pcmcia_cardbus_cards PCMCIA cards) used. ((/wiki/?Senao-SL2511CD Veritechs) work __straight out of the box__, no doubt other Prism2 cards will as well.) 

 The full installation details are in the current (http://www.nycwireless.net/pebble/pebble.README README)