home 
wiki
wiki
NodeJQM
| | Owner: <mattcosa> Location: Dingley Village Status:Operational SSID: <nodejqm> Connecting... Set your SSID to nodejqm, channel 1 |
Node Log
13/12/06 - Main router / gateway
Installed router running ClarkConnect 4.0. Provides DHCP and VPN access for private use.
11/12/06 - Added entries for melbourne wireless
Added two nodes to melbourne wireless database, JQM and JQN.
10/12/06 - Installed more permanent hardware
Placed the hardware on the roof in a more permanent manor. Still needs work.
25/11/06 - First Entry
Put the stuff on the roof! Very basic setup with very small, 2dbi antenna. Bridged to node JQN with exactly the same AP. Tested with LOS and established a 8Mbit link - stable over several hours. Removed hardware after testing.
Equipment
I currently own a Belkin 54G AP.
I run ClarkConnect 4.0
Services
DHCP and DNS(external) only. No uplink to melbourne wireless network available as of 13/12/06.
Plans
Upgrade and install more permanent antenna on roof.
Uplink to Melbourne Wireless main network.
Problems
Node is located in a very low spot, and has a lot of trees at the immediate hight level. Could be easily fixed with a 2mtr + pole for local (1km) connections. A *MUCH* hight pole would be required to connect to other nodes beyond this distance.
Version 1 (old) modified Mon, 26 Jul 2021 12:49:29 +0000 by mattcosa
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]