home 
wiki
wiki
Cameras
This Page Lists Camera around the Melbourne Wireless NetworkThe cameras are accessible on the Melbourne Wireless network only.
HVC Camera
http://hvccam1.in.mw.org.au/axis-cgi/jpg/image.cgi?resolution=VGA&compression=10&clock=1&date=1KKI Camera
http://kkicam1.in.mw.org.au/snapshot.cgiJAA Camera
http://jaacam1.in.mw.org.au:81/snapshot.cgiKOF Camera
https://kofcam1.in.mw.org.au/snapshot.cgiKKV Cameras
http://kkvcam1.in.mw.org.au/snapshot.cgi?user=guest&pwd=guest
http://kkvcam2.in.mw.org.au/tmpfs/auto.jpgThe following script can be run on the Ubiquiti AirCam's, which disables authentication for snapshot.cgi:
cat << 'EOF' > /etc/persistent/rc.poststart
#!/bin/sh
echo 'airos.allow += ("/snapshot.cgi")' >> /etc/lighttpd.conf
kill -9 `ps | grep "lighttpd -D" | cut -d " " -f 3`
EOF
cfgmtd -w -p /etc/
#!/bin/sh
echo 'airos.allow += ("/snapshot.cgi")' >> /etc/lighttpd.conf
kill -9 `ps | grep "lighttpd -D" | cut -d " " -f 3`
EOF
cfgmtd -w -p /etc/
This is persistent through reboots, however will need to be re-run after a firmware upgrade.
Alternatively if your Aircam is on the MW network, you can easily apply the above script by running the following one-liner when SSH'ed into the camera:
wget http://10.10.65.82/aircam_config.sh -O - | sh
Version 13 (current) modified Mon, 26 Jul 2021 12:49:29 +0000 by markde
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]