home 
wiki
wiki
Senao-SL2511CD
- Vitals
- Pictures
- Operating Systems
- Firmware
- Misc Notes
Vitals
| Manufacturer |  http://www.senao.com |
| Model | Senao NL/SL-2511CD PLUS EXT2 (200mW, 2 MMCX) |
| Type | PCMCIA |
| External Antenna Jack | 2 off |
| Chipset | IntersilPrism2 |
| Power | 200mw (100mw is also available) |
| Recieve Sensitivity | 1 Mbps @ -96 2 Mbps @ -93 5.5 Mbps @ -91 11 Mbps @ -89 |
| Drivers URL | see below |
| Available New | Yes |
| Average Price | $120 |
| Vitals last updated | july 2004 |
Manufacturer Sales Pitch
Long Range Wireless PC Card with Two Antenna Jacks for Embedded System
Model no. NL-2511CD PLUS EXT2
| Feature | Benefit |
up to three times range of standard products
(Depends on different countries)
| Compliant | IEEE802.11b compliant |
| Automatic data rate scaling at 11, 5.5, 2 and 1 Mbps | Optimized throughput, range and connectivity |
| Improved 64/128-bit WEP Engine | Significantly improved throughput |
| Wide coverage range up to 1200 meters in open space | Wireless connectivity for all your computers |
| Advanced Power Management | Extended battery life |
| Plug and Play | Easy installation |
| Significantly improved indoor multi-path distortion | Higher link quality in indoor environment |
General
| Radio Data Rate | 11, 5.5, 2 and 1 Mbps, Auto Fall-Back |
| Range (open environment) | 11 Mbps 300m/450m ( 23 dBm output power) 5.5 Mbps 400m/600m ( 23 dBm output power) 2 Mbps 500m/750m ( 23 dBm output power) 1 Mbps 800m/1200m ( 23 dBm output power) |
| Operating Voltage | 3.3V/5V |
| Regulation Certifications | FCC Part 15/UL, ETSI 300/328/CE |
| Compatibility | Fully interoperable with IEEE802.11b compliant products |
| LED Indicator | RF Link activity |
Network
| Network Architecture | Support ad-hoc, peer-to-peer networks and infrastructure communications to wired Ethernet networks via Access Point |
| Drivers | Windows 98SE/ME/2000/XP (also Linux) |
| Access Protocol | CSMA/CA |
| Roaming | IEEE802.11b compliant |
| Security | 64/128-bit WEP data encryption |
Radio
| Frequency Band | 2.4 - 2.484 GHz |
| Radio Type | Direct Sequence Spread Spectrum (DSSS) |
| Modulation | CCK (11, 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps) |
| Operation Channels | 11 for North America 14 for Japan 13 for Europe 2 for Spain 4 for France |
| RF Output Power | 23dBm(200mW)- FCC 20dBm(100mW)- CE |
| Antenna | Two antenna connectors (MMCX) |
| Sensitivity @FER=0.08 | 89dbm @11 Mbps 91dbm @5.5 Mbps 93dbm @2 Mbps 95dbm @1 Mbps |
Environment
| Temperature Range | -10 C to 60 C - Operating -40 C to 70 C - Storage Humidity (non-condensing) 5% to 95% typical| |
Physical
| Form Factor | PCMCIA Type II PC Card |
| Dimensions | 118(L) mm x 54(W) mm x 7.5(H) mm |
| Weight | 40 g |
Updated: 05/21/2004
*All specifications are subject to change without notice.Reformated from
NL-2511CD-PLUS-EXT2.pdfPictures
Operating Systems
Linux
Used with the
HostAP drivers the card will function as an accesspoint, in client(managed) mode, ad-hoc or RFMon (Monitor) mode.Windows
XP
Info about using with WinXP - needed!2000
Some more information - also needed!Firmware
Jun Sun'sMini-howto on Flashing Intersil Prism Chipsets - while centered around linux, it also has Dos and Windows referencesMisc Notes
Further reading
Seattle Wireless wiki entryMain antenna
Hold the card with the PCMCIA connector part pointing to the right and the top of the card facing you (ie: the led light is visible).The main antenna is the bottom connector.
Version 1 (current) modified Mon, 26 Jul 2021 12:49:29 +0000 by graybeard
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]