! Background

Node KKX is operated by the Essendon Model Railway Group.  We are a membership based organisation with a common interest in Model railways both HO and N scale.



! Node History

August 2011

The Node is put into production service during the evening of the 10th August 2011.



Connection is established with Node HVC-N.melbournewireless.org.au from NodeKKV.melbournewireless.org.au.  Signal is workable but further alignment work on the antennae may be required.  The noise floor is found to be -90dBm with signal strength established at -80dBm.  We hope to maintain at least 10dBm link margin. Radio throughput for the link in AIRMAX mode is around 20 Mbps.



The following week external building works already completed, cable is run and installed into the club.  Ethernet is connected and any power works are completed.



Rob Britt and Brian Evans begin the installation of the node and rooftop works.  The external works are completed week ending 6th August 2011. Rob Britt works by moonlight.



July 2011

Brian Evans and Rob Brittan performed some radio testing using Ubquiti equipment and have successfully connected and associated with HVC-N.melbournewireless.org.au from the KKX site. The [NodeHVC] signal strengths did vary but not surprising as the day was windy and the test conditions difficult.  The site is a high site with potential for connections to other nodes.



I have provided some screenshots of the scanning undertaken by Rob Britt and myself.



(http://melbournewireless.omni.com.au/NodeKKX/Screen%20shot%202011-07-02%20at%203.31.26%20PM.png http://melbournewireless.omni.com.au/NodeKKX/Screen%20shot%202011-07-02%20at%203.31.26%20PM.png Screenshot A)



(http://melbournewireless.omni.com.au/NodeKKX/Screen%20shot%202011-07-02%20at%203.31.55%20PM.png http://melbournewireless.omni.com.au/NodeKKX/Screen%20shot%202011-07-02%20at%203.31.55%20PM.png Screenshot B)



(http://melbournewireless.omni.com.au/NodeKKX/Screen%20shot%202011-07-02%20at%203.34.08%20PM.png http://melbournewireless.omni.com.au/NodeKKX/Screen%20shot%202011-07-02%20at%203.34.08%20PM.png Screenshot C)



May 2011

The [NodeHVC] Northern and Western radios were upgraded to Ubquiti 5.8GHz equipment.  This was done to ensure connections in the west to [NodeKKV] (Bunbury Street Railway Webcam Project) and northern connections to [NodeFZJ] (Rob) in Coburg.  Both connections are at this time up and running and stable.



March 2011

The site was surveyed by RATBAGGY and Rob for access to the [NodeJLP] at Heidelberg. At that stage the HVC northern and western radios were running on Motorola canopy equipment.



It as not possible to establish a radio link from the KKX node to the Melbourne Wireless network.  We did see 5.8GHz services to the west of the site, however, they were not suitable for a connection.