|| {http://melbournewireless.org.au/nodes/map?id=JQM http://melbournewireless.org.au/nodes/view?id=JQM Node JQM} || '''Owner''': <(/users/?mattcosa mattcosa)>%%% %%%'''Location''': Dingley Village%%% %%% '''Status''':Operational%%% %%% '''SSID:''' <[nodejqm]>%%% %%% '''Connecting...'''%%% Set your SSID to nodejqm, channel 1 || !! Node Log ++++ 9/8/08 Upgraded the TV mast to a 4mtr steel pole with three guide wires. The top of the 12Dbi omni now reaches roughly 5.2 meters above the roof. Unfortunately the RP-SMA pigtail broke in half when it fell out of the box. Will persue a new AP. 17/9/07 Finally installed a 12dbi omni antenna to the TV mast. 4/9/07 Moved to different location above shed, still needs work for permenant install. 13/12/06 - Main router / gateway Installed router running ClarkConnect 4.0. Provides DHCP and VPN access for private use. 11/12/06 - Added entries for melbourne wireless Added two nodes to melbourne wireless database, JQM and JQN. 10/12/06 - Installed more permanent hardware Placed the hardware on the roof in a more permanent manor. Still needs work. 25/11/06 - First Entry Put the stuff on the roof! Very basic setup with very small, 2dbi antenna. Bridged to node JQN with exactly the same AP. Tested with LOS and established a 8Mbit link - stable over several hours. Removed hardware after testing. ++++ !! Equipment I currently own a Belkin 54G AP. I run ClarkConnect 4.0 !! Services DHCP and DNS(external) only. No uplink to melbourne wireless network available as of 13/12/06. !! Plans Upgrade and install more permanent antenna on roof. (DONE) Uplink to Melbourne Wireless main network. !! Problems Node is located in a very low spot, and has a lot of trees at the immediate hight level. Could be easily fixed with a 2mtr + pole for local (1km) connections. A *MUCH* higher pole would be required to connect to other nodes beyond this distance. !! Links I used this method to locate my house without a GPS unit. Very easy; (http://www.accessgrid.org/node/767 http://www.accessgrid.org/node/767)