|| {http://melbournewireless.org.au/nodes/map?id=KIL http://melbournewireless.org.au/nodes/view?id=KIL Node KIL} || '''Owner''':  <(/users/?lbellamy lbellamy)>%%% %%%'''Location''': James Street, Belmont%%% %%% '''Status''': Linked to KHI%%% %%% '''SSID:''' kil.melbournewireless.org.au%%% %%% '''Connecting...'''%%% Set your SSID to __kil.melbournewireless.org.au__ and contact (/users/?lbellamy lbellamy) for the WPA key and for more information. ||

!! Node Log 

++++
09/10/10 - Installed a Ubiquiti Picostation M2HP (a 1 watt, 6db omni on 2.4 ghz) on the top of the mast to allow for connections to this node. Range tested to be about ~200 metres with a mobile phone without significant drop in signal reception, and will be attempting to do some further range / throughput tests in the near future using some proper directional equipment / proper range.

Routing seems to be working correctly to / from clients on the omni, and the subnet which ive been allocated and am using for the omni (10.10.66.64/28) is being advertised to OSPF.

27/09/10 - Installed new mast on apex of roof. Link quality to KHI has improved drastically. Current signal strength at -71db, with an airmax signal quality of 45% and TCP throughput of about 5 megabytes per second.

Ordered a Ubiquity Picostation (1Watt Version) and hope to have that installed in two or three weeks. 

29/05/10 - Installed Node (Ubiquiti Nanobridge M5) and secured link to KHI. 

Current signal strength at -87db, with an AirMax signal quality of 38%. 
Confirmed current maximum throughput of the link of ~500kilobytes per second. 

Will put another mast on the apex of the roof, which should raise the current height of ~5 metres to approx 8 metres. Once this is done, ill put an omni on top and allow others to connect.
++++

!! Equipment 

Ubiquiti NanoBridge M5 (Linked to KHI)
Ubiquiti PicoStation M2HP (1 Watt / 6db Omni )
MikroTik Routerboard 750G

All Ubiquity devices run Ubiquity AirOS.

!! Services 



Elaborate on services seen on the (/maps/view?id=KIL maps page) (replace XXX with  your node id). The node must be in __testing or operational__ to be listed 



 



!! Plans 


Planned: Ubiquiti NanoBridge M2 (to link to JEE)


!! Problems 

N/A




[CategoryNode]