|| NodeMap:ILE || '''Owner''':  (/users/?melb_ap)%%% %%%'''Location''': Kallista%%% %%% '''Status''':Testing%%% New Links being Established||
 
!! Node Log 
++++
12/12/04 - (Old Site) With many thanks to Peter from NodeGUR and Mike from NodeHKF who installed 2 Hills 24dB grid antenna and 2 Linksys WRT54GS creating individual links to NodeGUR and NodeFOB

25/6/05 - The Fernycreek site is all down now & we're in progress of setting up the new site at Kallista. Expect to have some equipment running again on 2/7/05.

++++

!! Equipment 
 
 
!! Services 
Planned
- OSPF
- Webcam
- Backbone uplink point
 
!! Plans 
New Kallista site : 

* Stabilise the link back to GUR & possibly FOB  (LOS Permitting at FOB). 
* Setup a waveguide with a 200mw senao AP to enable LOS tests to this site.

Notes : The view covers from about Mt Waverley to somewhere around hampton park or south dandenong not sure yet of the bearings.
Checkout (http://www.nodedb.com/australia/vic/melbourne/view.php?nodeid=757 Here) for LOS checks.

 
!! Problems
Power to the pole is limited by POE.

!! Learnings
* The DLINK 48v DWL-P200 poe kit transmitter works with the senao 2611 cb3 delux internal POE.
* POE seems to be configured with Positive (+) on Cat5 pins 4/5 (green/greenwhite) and Negative (-) on pins 7&8 (Brown/Brownwhite)
* Most AP's seem to have dioes to protect against power polarity reversal.
* The Linksys WET11 V1 seems to be only missing two surface mount diodes to enable it use POE. (Haven't tested)